3D Green Rotary Beam 12 Lines Laser Auto Leveling Laser Level Description The Green Laser Level has a wide range of applications in architecture, industrial and home use, and is…
3D Green Rotary Beam 12 Lines Laser Auto Leveling Laser Level
Description
The Green Laser Level has a wide range of applications in architecture, industrial and home use, and is very helpful in finding accurate horizontal and vertical lines. It is easy to use in a variety of applications, such as laying tiles and floors, installing closets, installing ceilings and Framing doors and windows, installing wires, piping, and installing railings.
Specification of Product:
Laser Beam | 12 green beams |
Laser wave length | 505nm/525nm/532nm |
Level accuracy | ±1mm/7m |
Temperature Range | -10℃ -50℃ |
Working Range | 20/70m |
Automatic Compensatory range | ±3° |
Laser emission Angle | YES |
Power supply | Two lithium batteries |
Continuous operating time | 5 hours |
Size | 125*110*135mm |
Charging instructions
1. Connect the interface charging cable to the power adapter or portable power supply to ensure proper connection;
2. Open the dust cover charging port on the tool and connect the interface to the charging port to ensure the connection is correct.
3. Connect the power outlet. The charging indicator will light red and charging will begin;
4. When fully charged, the indicator lights up in green.
Automatic leveling mode
Place the Green Laser Level naturally until the internal leveling unit stops swinging. When the tool finishes auto-leveling, the tilt indicator will turn green and continue to use the laser.
If the laser keeps flashing, the buzzer sounds and the tilt indicator is red, the tool cannot complete the auto leveling. If automatic leveling is not possible at all times, it indicates that the surface on which the tool is located deviates from the horizontal level of the horizontal plane.
No auto leveling mode (lock mode)
Keep the knob in the “off” position, press the “H” and “V” keys to turn on the corresponding laser and the tool will work in lock mode. The tilt indicator will always be red to warn the function mode. Place the tool to continue using the laser.
This mode is always used to adjust or mark straight lines and slashes from more than 3 or more levels. Even if the auto leveling range is exceeded, the tool will not display any warnings in this mode. This mode cannot be used to perform horizontal or vertical leveling.