This professional-grade laser Digital Measures is fast and easy to use improving accuracy and reducing measurement errors. It is our most sophisticated laser distance meter packed with versatile features to save you more time in more situations.
Inclination sensor assists with height tracking, leveling, and indirect horizontal distance measurements when line-of-sight is blocked by an obstacle.
It is very useful and convenient to give accurate measurement of distance, area and volume especially in large areas such as rooms, apartments, buildings, real estates, factories, warehouses, gardens, roads, infrastructures, etc.
Automated End-piece Correction for measuring from an edge or corner –a built-in sensor detects the position of this bracket and automatically changes the reference point.
Easy-to-use addition and subtraction functionLaser distance meter has a wide variety of applications in construction and industries.
1) ON / Measure / Continious measurements/ Selecting units 2) Area / Volume / Pythagorean measure / Reference setting 3) Clear / OFF
1) Laser ON 2) Reference (front/rear) 3) Area / volume/ Pythagorean 4) Battery level 5) Units 6) Line 1 7) Main line 2
|Measuring accuracy||Typical 1+-2mm|
|Laser classification||Class 2|
|Protection against splashes and dust||IP54|
|Temperature range for operation||0~40°C|
|Laser type||620~690nm,<1mw 0.16×0.6 mrad,0.25s|
1. Distance meter measure
Press “on” to make the laser on. Keep products stable and be alignment.
Press “on” to again for 0.8 second. It will display the measurement result on the screen. And the laser will be off
Press one time to measure the length
Make laser on be alignment
Keep product stable when measuring
2. Area Measure
First press the “area” button, then the picture of square body will display on the screen, then press “on” to measure the length, then press “on” again to measure the width, then the area result will display on the screen.
3. Volume Measure
Press “area” twice, the cube will display on the screen. Measure the length at first, then measure width, at last measure height, after all, the volume result will display on the screen. Easy to use, convenient to use.
4. Reference setting
When measuring, make the products stable. Then it will be more accuracy.
5. Continuous measure
After the laser on, press “on” for 2 seconds, it will be into the continuous statement, then the main measure area will display the real-time data. And the auxiliary area will display the max measuring data and the min measuring data, after this, then, shortly press the “clear off” it will finish the continuous model.